Screw Design: | Single- Twin Screw Extruder | Application: | PE Film |
---|---|---|---|
Overseas Service: | Available | Screw Diameter: | 180mm/71mm |
Motor: | 132kw/132kw | Capacity: | 400-500kg Per Hour |
Color: | Any Color | Cutting Method: | Underwater |
a. The screw ¢180mm,
b. The screw material: 38CrMoALA, nitrogen hardening. The hardness of the surface is HV950-1050, deep layer: 0.5-0.7 mm,
c. The barrel material: 38CrMoALA, nitrogen hardening. , the hardness of the surface is HV950-1050; deep layer: 0.5-0.7 mm;
e. d. Screw centre high 900mm; by involute spline connecting with gearbox and screw,
e. Screw length: ~5040mm;Barrel heating: cast- Aluminum heater. Heating power: 60kw, divided to 9 zones, controlled by separately, has
one heating zone on the machine head, total heating zone are 10 zones.
Cooling by fans. Heating capacity: 0-500 ℃;
f. Main machine gear box mode type is 315. I=16, with high torque, and hard gear face, using SKF imported bearing, material of the
gear axial is 20CrNiMo, by immerse carbon and heating treated, HRC60-63;
g. Motor power: AC motor 132 KW, transmitting by belt, with inverter of Yolico, screw speed: 0-58rpm.
S Scope of supply
NO. | CONTENT | UNIT | QUANTITY | NOTES |
1 | YD-180 single screw main machine | set | 1 | |
1.1 | Single screw main machine | set | 1 | |
1.2 | Hydraulic exchanger system | set | 1 | |
2 | SJ-75B twin screw subordinate machine | set | 1 | |
2.1 | Twin screw subordinate machine | set | 1 | |
2.2 | Water circulating system | set | 1 | |
2.3 | Vacuum venting system | set | 1 | |
2.4 | Hydraulic exchanger system | set | 1 | |
3 | Electric control system | set | 1 | |
4 | Water-strand auxiliary machine | set | 1 | |
4.1 | Water trough 6 M | set | 1 | |
4.2 | Dry 2.2 KW | set | 1 | |
4.3 | Pelletizer 500kg/h | 1 | ||
5 | With spare parts | set | 1 | |
6 | With documents | set | 1 |
Main Technical Details of Two Stage Plastic Pelletizing Machine
Model type | Screw Diameter (mm) | Screw L/D | screw speed n(r/min) | Main motor power(Kw) | Typical production capacity (kg/h) | |
ZL51-100 | SJSL51 | 50.5 | 20-48 | 500-600 | 37/45 | 150-300 |
YD100 | 100 | 7-15 | 65-85 | 37 | ||
ZL60-120 | SJSL60 | 59.5 | 20-44 | 400 | 37/45 | 200-350 |
YD120 | 120 | 7-15 | 65-90 | 37 | ||
ZL65-150 | SJSL65 | 62.4 | 20-48 | 400-600 | 55/75 | 250-450 |
YD150 | 150 | 7-15 | 65-85 | 37/45 | ||
ZL75-180 | SJSL75 | 71 | 20-44 | 400-600 | 75/90 | 400-650 |
YD180 | 180 | 7-15 | 65-90 | 45/55 | ||
ZL95-200 | SJSL95 | 94 | 20-44 | 400-600 | 220/280 | 700-15000 |
YD200 | 200 | 7-15 | 65-85 | 75/90 |