PE PP Masterbatch Single Screw Extruder Machine 900mm Screw Height

Detailed Product Description
Screw Design: Single Screw Extruder Application: Pe Pp Masterbatch
Warranty: One Year Screw Diameter: 180mm
Motor: 90kw Capacity: 300-400kg Per Hour
Material: 38CrMoALA Central Height Of Screw: 900 Mm
PE PP Masterbatch YD180 Single Screw Extruder Plastic Pelletizing Machine   Characteristic of single screw extruder 1.High precision gear box with ability of over loading, smooth transmitting, lower noise 2.Newly designed barrel and screw to ensure well-distributed of material in melting, low melt temperature and high production 3.The screw is made with standard and high precision during process. After treated by gases and nitride the barrel, it possesses strong wear- and corrosion- resisting. For special material, double metals are available for barrel etc. 4.The barrels cooled by lower with super mute working status, less maintenance 5.PID temperature is controlled by Japan temperature control meter with stable and accurate temperature. 6.Two type of die head design: manual and hydraulic type for easy changing and time saving. 7.ABB or other famous brand Inverter speed control for more stable and good performance of machine and easier operation   Typical Application Working for plastic raw material dye, recycling plastic pellets from film, flake, scrap and engineering plastics, such as ABS, PC, POM, PP, PE, ABS/PC, PET etc.   Main technical parameter of YD-180 production line

1. Single screw main machine:

1) Screw diameter: ¢180mm, L/D: 28:1,

2) The screw are connected to the gear box through involute spline;

3) The screw material: 38CrMoALA, nitrogen hardening. The hardness of the surface is HV 950-1050, deep layer: 0.5-0.7 mm; the barrel material: 38CrMoALA, nitrogen hardening. , the hardness of the surface is HV 950-1050; deep layer: 0.5-0.7 mm;

4) Main motor power: 100 kw, (A/C) speed is regulated by Italy regulator; screw speed 17-84rpm;

5) Barrel heating: cast- Aluminum heater. Heating power: 60 kw, divided to 7 zones, The machine head is a zone and others are 8 zones. Cooling by blowing way;

6) Adopted 250 model gear box. The speed is controlled by main transmission box with high torque, and hard gear face, using SKF imported bearing, material of the gear axial is 20CrNiMo, by immerse carbon and heating treated, HRC60-63;

7) Adopted automatic screen changer, operating easily;

  Interlock control 1). The extruder motor is set up the current overload to achieve chain shutdown protection with electric control cabinet. 2). The control system of main machine motor is interlocked with control system of feeder motor as a way of protection mutually. 3). Transmission gearbox and lubrication system are interlocked for protection. 4). The extruder is set up the pressure overload to achieve chain shutdown protection with electric control cabinet. 5). The main motor is connected with the nylon pin of transmission gearbox so as to cut off the nylon pin when torque is overload.   Photo of YD180 machine

  Main technical data of various model of single screw extruder palstic pelleitizing machine

Model type Screw Diameter (mm) Screw L/D Main motor power(Kw) screw speed n(r/min) Typical production capacity (kg/h)
YD-30 30 25-33 4/5.5 3-100 2-15
YD-45 45 20-32 5.5/7.5 5-84 5-40
YD-60 60 20-32 17.5/22 5-84 15-80
YD-90 90 20-33 30/37 5-84 25-120
YD-100 100 20-33 37/45 5-84 45-150
YD-120 120 20-33 45/55 5-84 75-200
YD-150 150 20-33 75/90 5-84 150-300
YD-180 180 20-33 90/132 5-84 200-400
YD-200 200 20-33 110/160 5-84 250-500
  Company Brief Nanjing Yongjie Qixin Machinery Equipment Co.,Ltd Founded in 2001, covers an area of 20,000 square meters on our own land, with monthly output of machine 20sets. Our factory is certificated to CE, ISO9001:2008.The company concentrates on research, development and production of “high level, accurate, highly sophisticated series product parallel co-rotating “cordwood” twin screw extruder, single screw extruder, two stage extruders and automatic plastic pelletizing machines. We have provided customers first-class products with “strong torque, high production, energy conservation and environmental protection products. The special designed screw structure has realized successfully for “one step shaping” on many kinds of products, and is widely used in aluminum composite plate, XPS foaming plate, WP plate, PP, PE sheet industry, etc. QAULITY IS PUT AT THE FIRST , and our factory is certificated to ISO 9001:2008 and CE.